Home > News > Content

Stainless Steel Wire Ropes Different Structure

Jiangsu GT Inox Co.,Ltd | Updated: Oct 26, 2017

The production of stainless steel wire rope, are generally expressed in terms of the weight of stainless steel wire rope. However, the production capacity of each twist or twister is expressed in terms of the length of the strand or rope that is twisted in its unit time. To this end, Stainless Steel Wire Ropes you must master the unit length of stainless steel wire rope weight calculation method.

The rough calculation of the weight of the stainless steel wire rope is not difficult, but it is not easy to accurately calculate the weight of the stainless steel wire rope. Stainless Steel Wire Ropes As the weight of stainless steel wire rope is not only related to its diameter, but also with the stainless steel wire rope wire diameter tolerance, twist spacing size, rope and stock cross-sectional area, the presence and number of Ma core and the core temperature, oil content And so on. At the same time, the above factors are often changing, it is difficult to accurately measure. For this reason, the length of the stainless steel wire rope can only be roughly calculated.

Stainless steel wire after a spiral twist, Stainless Steel Wire Ropes the length to be shortened, the degree of shortening with the twist angle may be, stainless steel wire in a single wire rope is a spiral line, in the wire rope is a spiral; in the steel The cable is a three-time spiral state. Therefore, the length of the stainless steel wire in the process of twisting a single strand of steel rope, wire rope and cable is obviously not the same.

The degree of shortening the length of the stainless steel wire after twisting is usually indicated by the twist factor. It is the ratio of the original length of the stainless steel wire to the length of the stainless steel cord.

The size of the twist factor, Stainless Steel Wire Ropes depending on the size of the twist angle, the twist angle is large, the twist coefficient is also large; twist angle hours, twist coefficient is also small.

Stainless steel wire rope in use, with the heavy machine reel or rope groove groove surface is called the support surface, also known as the support point. Stainless Steel Wire Ropes In the calculation of support points, should be calculated according to different structures, stainless steel wire rope is a stainless steel wire rope cross-section and the indirect contact between the number of points to represent.

Stainless steel wire rope support surface in addition to the largest seal wire rope, the number of elliptical stainless steel wire rope. Oval stainless steel wire rope support point than the round strand stainless steel wire rope increased four times. Stainless steel wire rope and reel rope groove support point of how much of its life has a great impact. The more support points, Stainless Steel Wire Ropes the greater the contact surface of the stainless steel wire rope and the rope groove, the smaller the unit pressure and wear, and the service life can be increased accordingly.


Contact Us

Jiangsu GT Inox Co.,Ltd

Add:Industry Zone of Dainan Town, Xinghua City 225721, Jiangsu Province, China

Tel:+86 523 8021 9165

Mobile:+86-13961084477 (WhatApp)

Fax:+86 523 8378 5967

Email:info@inoxwirerope.com

© Jiangsu GT Inox Co.,Ltd
Tel: +86 139 6108 4477
Fax:+86 523 8378 5967
E-mail:info@inoxwirerope.com
Address:Industry Zone of Dainan Town, Xinghua City 225721, Jiangsu Province, China